NAD D 3020 V2 Manual
PDF manual · 12 Pages
English
Ask a Question
Frequently Asked Questions
The D 3020 V2 supports PCM digital input up to 24-bit/192 kHz on its optical and coaxial inputs. It does not decode native DSD; ensure source devices output PCM to guarantee compatibility.
Is this answer helpful?
Yes. The unit includes a dedicated PHONO input designed for Moving Magnet (MM) cartridges, with proper RIAA equalization and sensitivity tailored for MM turntables.
Is this answer helpful?
Pair your smartphone or Bluetooth device via standard Bluetooth pairing and select BT source on the amplifier. aptX is supported to reduce compression artifacts and provide near-CD quality over Bluetooth when both devices support aptX.
Is this answer helpful?
TV Connect uses the optical input plus IR learning to let the amp wake on TV digital output and accept volume, mute, and power commands from your TV remote. Auto Sense and Auto Standby settings also assist automated operation.
Is this answer helpful?
The D 3020 V2 provides continuous output of 30 W into 4 or 8 ohms, with high dynamic and clipping capability for short peaks. It suits bookshelf and efficient floorstanding speakers but may be modest for very large or inefficient speakers.
Is this answer helpful?
Yes. The SUBW OUT sends low-frequency content up to 150 Hz via a 3.5mm-to-RCA adapter. It’s intended for connection to an active powered subwoofer and avoids sending full-range signals to the sub.
Is this answer helpful?
To reset, press and hold the rear-panel BASS EQ until the unit defaults to COAX source. Firmware updates are performed via the SERVICE port following NAD’s published upgrade instructions; check NAD’s website for procedures and files.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- High-resolution digital support up to 24-bit/192kHz for clean digital playback
- aptX Bluetooth for improved wireless audio quality from mobile devices
- Dedicated phono input for moving-magnet cartridges expands vinyl compatibility
- Compact footprint with strong measured specs (low THD, high SNR and damping)
- TV Connect and IR learning for seamless living-room integration with TVs
Disadvantages
- Digital inputs accept PCM only — some devices must be set to PCM output
- Limited continuous output (30 W) — may be underpowered for very large rooms
- No built-in network streaming or proprietary app control included
- Bass EQ is a single toggle boost, not a parametric or multi-band EQ
- Firmware updates require manual service-port procedure
Product Description
NAD D 3020 V2 — Compact Hybrid Digital Amplifier
The NAD D 3020 V2 is a compact hybrid digital amplifier designed to bring refined sound and modern connectivity into small to medium listening spaces. With a minimalist footprint and robust feature set, it combines a high-performance preamplifier section, a powerful Class D amplifier stage, and flexible digital and analog inputs to suit vinyl lovers, streamers, and TV setups alike. The unit supports 24-bit/192kHz digital inputs, aptX Bluetooth for higher-quality wireless audio, and a dedicated phono input for moving-magnet cartridges, making it a versatile center for a simple yet capable audio system.
Internally, the D 3020 V2 emphasizes low distortion and wide dynamic range. The preamplifier offers excellent signal-to-noise ratios and precise frequency response, while the amplifier stage delivers clean continuous power sufficient for bookshelf speakers and efficient floorstanders. The D 3020 V2 also provides a headphone output with low-noise circuitry and a subwoofer output feeding low-frequency content up to 150 Hz, allowing seamless integration with active subwoofers for extended bass performance.
Operational convenience is a strong point: a sleek touch-sensitive standby button, a clear front display, and the included AMP 3 remote provide intuitive control. The AMP 3 supports source selection, volume, mute, bass EQ toggle, display dimming, and Bluetooth playback commands when paired. Advanced conveniences include Auto Standby and Auto Sense functions for energy saving and automatic wake-on-digital-signal, plus TV Connect and IR learning to let your TV remote manage volume, mute, and power for a simplified living-room setup.
Setup is straightforward: speaker binding posts accept bare wire or banana plugs, digital inputs (optical and coaxial) accept PCM up to 24/192, and analog AUX and PHONO inputs cover legacy sources. The PRE-OUT and +12V trigger allow daisy-chaining or integration with external amplifiers and automation systems. A BASS EQ toggle boosts low frequencies by about 6 dB at 80 Hz for a quick tonal lift when desired.
Mechanically, the D 3020 V2 is compact and lightweight with guidance for ventilation and optional dome feet for stable placement. Safety, grounding, and environmental disposal notes are included, and service/firmware updates are provided via a dedicated service port. The combination of measured specifications (low THD, high damping factor, strong SNR) and consumer-oriented features makes the NAD D 3020 V2 an appealing option for anyone seeking high-quality, versatile amplification in a small package.
Notes
- Supports aptX Bluetooth for improved wireless audio quality.
- Digital inputs are PCM-only; ensure source outputs are set to PCM for compatibility.
- Use auto-standby and auto-sense to integrate with TV setups and save power.
- Install with at least 10 cm clearance on sides, rear, and top for ventilation.
- Return batteries and electronic waste to proper recycling facilities.
Search for 166 Manuals online
Type-in Brand or Model