TC Helicon Go Vocal Manual
PDF manual · 2 Pages
English
Ask a Question
Frequently Asked Questions
The Go Vocal accepts one balanced XLR female microphone input, suitable for both dynamic and condenser microphones when phantom power is enabled.
Is this answer helpful?
Power the unit with a single 9V battery. Move the power switch to the PHANTOM position to enable +48V phantom power for condenser microphones; the front-panel 48V LED lights when phantom is active.
Is this answer helpful?
Plug the included cable from the Go Vocal’s output into your device’s headphone input or use the appropriate lightning/USB-C adapter. Monitor through the unit’s stereo headphone jack while recording.
Is this answer helpful?
Gain is controlled by a single front-panel GAIN wheel with sufficient range (up to 52 dBu). Increase gain while speaking into the mic and reduce it if clipping or distortion occurs.
Is this answer helpful?
The Go Vocal offers a frequency response of 50 Hz to 20 kHz (+0/-3 dB) and a signal-to-noise ratio greater than 101 dB, providing clear, low-noise vocal capture for mobile recording.
Is this answer helpful?
Yes. Download TC Helicon’s mobile apps to experiment with vocal effects and processing. The Go Vocal itself focuses on clean preamplification and monitoring while apps add creative vocal tools.
Is this answer helpful?
The device complies with FCC Part 15 rules. Technical specs and warranty details are provided by Music Tribe; consult the manufacturer’s resources for full warranty terms and support contacts.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Compact, lightweight design ideal for mobile recording and travel.
- Provides +48V phantom power for condenser microphones with visual LED indicator.
- High S/N ratio (>101 dB) and broad frequency response (50 Hz–20 kHz) for clean capture.
- Simple operation: XLR in, headphone out, single gain knob and power switch.
- Battery-powered (9V) — works without mains and integrates with mobile devices.
Disadvantages
- Runs on a single 9V battery which may require frequent replacement under heavy use.
- Limited controls—no onboard EQ or advanced routing; relies on companion apps for processing.
- Connects via headphone input/adapter which may limit direct digital routing on some devices.
- Mono mic input only — not suitable for multi-mic stereo recording without extra gear.
- Small form factor may be vulnerable to physical wear if not handled carefully.
Product Description
TC Helicon Go Vocal — Portable Mic Preamp for Mobile Creators
The TC Helicon Go Vocal is a compact, battery-powered microphone preamp built to bring studio-grade vocal clarity to mobile recording setups. Designed for singers, podcasters, and content creators on the go, this lightweight unit converts a standard XLR microphone input into a clean, headphone-monitorable signal that plugs straight into smartphones, tablets, or laptops via the device’s headphone input or lightning adapter.
The Go Vocal is simple to operate: insert a 9V battery, connect your XLR mic, plug the included cable into your device, and monitor through the stereo headphone output. A single GAIN control provides up to 52 dBu of input sensitivity, allowing accurate level control for both soft spoken-word takes and powerful vocal performances. For condenser microphones, the unit supplies +48V phantom power, indicated by a front-panel 48V LED.
Despite its small footprint (92 x 45 x 38 mm) and 0.10 kg weight, the Go Vocal delivers a wide frequency response (50 Hz–20 kHz, +0/-3 dB) and a high signal-to-noise ratio (>101 dB), ensuring recordings remain clear and free of hiss. The rugged yet user-friendly layout—power switch with OFF/ON/PHANTOM positions, a visible gain knob, and dedicated headphone jack—makes it ideal for quick setups at home, in the studio, or in the field.
Beyond core connectivity, TC Helicon encourages users to expand vocal possibilities through its companion apps, enabling effects and vocal processing that complement the preamp’s clean capture. The package includes basic wiring guidance and FCC compliance information, and is backed by Music Tribe’s brand network.
Whether you’re capturing demos, livestreaming, or recording interviews, Go Vocal offers a straightforward, reliable way to get pro-level mic preamp performance into a mobile device without complex routing or mains power.
Notes
- Runs on one 9V battery; battery life depends on phantom power and usage.
- Provides +48V phantom power for condenser microphones; 48V LED indicates active phantom supply.
- Use the gain control to prevent clipping—back off if vocals distort.
- Compatible with TC Helicon mobile apps for added vocal effects and processing.
Search for 166 Manuals online
Type-in Brand or Model